The operating process of the diesel generator set from preheating to starting is to preheat the unit equipped with a preheater. Before starting, the personnel can decide whether the unit is preheating according to the ambient temperature. A control screen with a preheating button can control the engine to start heating. Work to achieve warm-up purpose.
Switch on the key switch of the control screen from OFF to ON after power on. Observe that the instrument background light on the panel is on, indicating that the control screen is powered on, and the unit fuel is on, with an electronic speed controller or an EFI unit controller. Also working.
The start-up part of the unit control screen has an idle / full speed switch, and users can choose whether to start at idle or one time at full speed according to actual needs. Generally, the idle time should not exceed 5 minutes. The unit must not run under idle for a long time. Press the start button for a maximum of 30 seconds. The engine starts with the start of the motor. Once the start is successful, the start can be released. Button, the unit enters the running state.
Suggestion: In order to extend the service life of the start-up battery and start-up motor, it is advisable to control the time of the unit to start at 5-10 seconds. If one start is unsuccessful, you can pause the corresponding time and then perform the second start procedure.